Possible Buys

Live BUY evaluations. Click a row to inspect indicators and trailing.

Status	Pair	Context	Level	Price	Formula	Indicators	Trail	Age

Trail Analysis

ENTRY QUALITY

Net Improvement compares the executed BUY price with the price available when the trail started. Positive values mean a better entry; negative values mean the final BUY was more expensive.

Context All V21 contexts

0 recordsHover a context badge to see the complete activation context.

Start	Pair	Context	Status	Trail StartInicio trail	Trail LowMínimo trail	Drop	Retrace	Immediate BaselineReferencia inmediata	Execution PricePrecio ejecución	Net ImprovementMejora neta	Duration	Blocks	Outcome

Post-Sell Analysis

EXIT QUALITY

Analyze what price did after each executed SELL without opening trades one by one. Profit % is the realized net trade return. Post Up is measured from the real SELL execution price; Potential Profit compounds the realized return with that post-exit move, and Missed Profit shows the return left on the table. Lot avg remains the trade cost reference.

Close event is shown as Next buy only when post_next_buy_ts really exists.

0 tracked salesSortable columns show ↕.

	PairLot		Closereason					Trade priceExecutionLot avg	Post rangeHighLow

Open trades (open lots)

Waiting for live data

Unrealized PnL uses the live executable Bid for each open market. Feed freshness is independent from TCV and from the last price change.

Status	Pair	lot_id	Opened	Quantity	Bought priceBid price	Bought costCurrent value	ProfitInterest	Profit %	Actions

Closed trades

Status	Pair	Closed	lot_id	Quantity	Buy avgSell avg	Trade PnLTrade Interest	Prior DebtNet Profit	Life Max %Life Min %	Profit %	Fee (Quote)	Buy orderSell order	Actions

Late trades

A trade is marked as late when it closes after a newer lot has already opened.

Status	Pair	Closed	lot_id	Opened	Next open	Overlaps	Quantity	Buy avgSell avg	ProfitInterest	Profit %

Lot Analytics

Level = number of open lots before opening the lot. Efficiency = lots closed before any later lot opens. Average buy and Net ROI use closed lots; Quote/1,000/day adjusts profit by capital and duration.

Level	Purchases	Closed	Before next	Efficiency	Avg. duration	Median	P90	Profit	Average profit	Average buy	Net ROI	Quote/1,000/day

By MACRO/MICRO regime

Each block corresponds to the exact entry regime pair: BULL/BULL, BULL/NEUTRAL, BULL/WEAK and the other six combinations.

Backtesting

Backtests use a fixed configuration snapshot and historical market data. No live trades are executed.

Checking…

Market From To Label (optional)

Idle0%

Saved Backtests

Completed backtests are saved automatically and can be exported or imported to share results.

Status	Market	Period	Created	Ended	Elapsed	Net PnL	ROI	Trades	Win rate	Actions
No backtests loaded.

Backtest result

Lot	Buy	Sell	Buy avg	Sell	Qty	Cost	Fees	Net PnL	ROI	DCA	Regime	Capital

V21 Better Entry

Post-buy audit: measures whether better absolute entries, V21 ok=True or buy_ok=True appeared after each buy in 15m/1h/4h/24h windows.

Buy time	lot_id	Seq	Buy price	State	Pair	Best trade	15m abs/V21/conf	1h abs/V21/conf	4h abs/V21/conf	24h abs/V21/conf	BUY_OK

Buys (fills)

Show expands two buy snapshots: the initial state that started the trail, and the state at fill time.

Date / time	Pair	Lot	Order Type	DCA	Qty	Bought Price	Bought costBuy Fee	Total LotDust	Lot Avg	Actions

Sales (fills)

Show expands two sell snapshots: the initial state that started the sell trail, and the state at fill time.

Date / time	Pair	Lot	Order Type	DCA	Qty	Bought PriceSold Price	Bought CostSold Value	Bought FeeSold Fee	BorrowInterest	PnL	PnL %	Actions

External Sales (fills)

External sells not linked to cycle closed trades (EXT/EXTERNAL or no lot match) (Show expands details below, Open Trades style).

Date / time	Pair	Lot	Order Type	DCA	Qty	Bought PriceSold Price	Bought CostSold Value	Bought FeeSold Fee	BorrowInterest	PnL	PnL %	Actions

Transfers

Profit settlement audit. Trade PnL remains separate from prior-debt settlement; only eligible profit after settlement can be transferred.

Status

Date	Pair	Lot	Asset	Status	Amount	Trade PnL	Eligible	Reserve	Reason	Actions

Cancelled Orders

Cancelled BUY/SELL audit from the bot order history. Partial fills remain visible.

Date	Side	Type	Pair	Lot	Order	Final status	ExecutedRequested	Order Price	Executed Quote	Reason	Borrow repaid

Borrow / Repay ledger

Borrow / repay / interest accounting from the bot transaction history.

Status

Current borrow

—

Current interest

—

Free

—

Margin snapshot

Net asset

—

Date	Type	Pair	Lot	Asset	Status	Amount	Requested	Borrow Before	Borrow After	Interest Before	Interest After	Reason

Market Performance Ranking

Realized closed trades ranked on a capital-normalized basis. Return / Day % is universal across quote assets; Quote / 1,000 / Day is shown in each market's own quote asset.

Period

30D

Best normalized market

—

Realized trades

—

Snapshot / timezone

— · —

	Market	Quote

ALL portfolio benchmark —

Performance by period

Click any period header to rank markets independently. Cells show normalized Return / Day %.

Market	Quote

Daily stats

Day	Trades	Quantity	Exposed Capital	Turnover	Trade PnLPrior Debt	Net Profit	Return % · Exposed Capital	Avg Trade %	Winrate

Monthly stats

Month	Trades	Quantity	Exposed Capital	Turnover	Trade PnLPrior Debt	Net Profit	Return % · Exposed Capital	Avg Trade %	Winrate

MULTI-MARKET

Markets

Run multiple trading pairs inside one TCB installation. Each market keeps independent indicators, formulas, DCA levels, lots and history while sharing one exchange account and a global capital guard.

SupervisorLoading…—

Configured markets

—

Trading pairs registered in this installation.

Global capital

—

Sum of Capital allocated across all trading markets.

Markets active

—

Markets currently active and available for trading.

Open lots

—

Open lots across all configured markets.

Shared quote asset

—

Every configured market must use the quote asset of the original market.

Global capital guard

Coordinates the shared quote balance across active markets and prevents overlapping capital commitments.

Max concurrently active markets

0 = unlimited.

Max total exposure in shared quote asset

0 = unlimited. All markets share the original market's quote asset.

Keep quote balance reserved

Amount TCB will leave uncommitted in the shared account.

Add trading market

TCB validates the pair against the configured exchange before creating it. It also checks API-key symbol whitelist restrictions when the exchange exposes them. Every market must use the same quote asset as the original market.

Trading pair

TCB verifies market availability, shared quote compatibility and API-key symbol whitelist access when available.

Clone configuration from

Capital allocation

Market-specific capital used by Capital-return statistics. Assign capital before disabling SOM.

Max exposure for this market

Maximum simultaneous exposure for this market. 0 = no market-specific cap.

Trading markets

Capital is the allocation used for market/global Capital-return statistics; Max exposure is the simultaneous risk cap. Use Sell Only Mode (SOM) to block new BUY entries without stopping SELL/EXIT management. Drag markets or use ↑ / ↓ to set display order.

Order	Market	Status	Sell Only Mode (SOM)	Open lots	Capital	Exposure	Max exposure	Slippage	Actions
Loading markets…

Shared quote protection

If the original market is BTCUSDC, additional markets must also use USDC (for example ETHUSDC, XRPUSDC or ZECUSDC). TCB verifies market existence, base/quote assets and API-key symbol whitelist restrictions when the exchange exposes them. TCB also blocks any incompatible market entry from becoming active.

Capital history & backward compatibility

Legacy Global Capital is migrated from the Original Market previous Capital base. Secondary legacy Capital is derived from each market Max exposure and the Original Market receives the residual. From migration onward every Capital change is timestamped. Existing trades and trading logic are preserved.

Trade Cycle Bot

Configuration

Manage execution, markets, notifications, risk controls and market-specific strategies from one protected workspace. Advanced controls remain available without exposing internal implementation details.

Protected settingsPer-market strategiesRevision history

Guided setup

Use Guided Setup for normal configuration. Use Migration Wizard for structural exchange, market-route or quote-asset changes so TCB can remap every market, convert quote-denominated capital and keep history epochs separated.

Guided Setup remains the path for capital, position sizing, borrowing, strategy preset, DCA and profit handling. Migration Wizard is required when an existing installation changes exchange/market type, quote asset, or starts a fresh trading epoch.

Trading mode

Switch between live exchange execution and paper execution without changing your strategies or market configuration.

Loading…

Execution

Current modeREAL

Change to

I manually confirmed the real exchange is flat. Use only if TCB cannot verify every live condition automatically.

REAL → TEST is blocked until every real TCB lot/order and margin debt is flat. A mode change creates an automatic internal backup, clears trading records, then restarts TCB. Operational settings, Strategy Builder and Markets configuration are preserved.

Trading data

Mode data loading…

Exports contain trading/runtime records only — never API keys or dashboard passwords. Importing into REAL restores historical records/statistics only; live lots, orders, debt and trailing state are never recreated in REAL. TEST imports may restore a full paper snapshot.

Reset trading data

Start TCB with clean trading data while preserving your dashboard account, encrypted exchange credentials, Operational settings and Strategy Builder configuration.

PROTECTED

For safety, reset is blocked while TCB has open lots, pending orders, active trailing, exchange open orders or outstanding margin debt. A compressed backup is created before deletion.

Dashboard config

Dashboard preferences for this installation.

Loading…

API endpoint

Auto refresh

TCV range

Scan limit

Timezone

Search by city or region, for example Madrid or Santiago.

Auto refresh changes are saved immediately. Intervals of 1–2 seconds increase system load.

Trade notifications

Receive confirmed BUY, SELL, BORROW and REPAY events through your own Email/SMTP, Telegram, Discord or webhook integrations. Notifications are generated only after the exchange confirms the operation.

Loading…

Trade and margin notifications can contain sensitive financial information. Credentials and webhook secrets are encrypted locally on this VPS and are never sent to the Trade Cycle Bot Commercial Portal. Send notifications only to destinations you control.

Delivery historyLatest 100 attempts. Message contents and secrets are not stored here.

Time	Event	Channel	Status	Latency	Detail
No notification deliveries yet.

Performance analytics

Optionally share finalized closed-trade economics with the Trade Cycle Bot Portal for fleet performance analytics.

Loading…

Closed-trade reportingThis setting applies to the entire installation, not an individual MARKET.

Open positions, account balances, exchange credentials and raw exchange order IDs are not transmitted. Reporting starts from the time you opt in; older trades are not automatically backfilled.

Privacy policy

Reporter statusDelivery is outbound HTTPS and idempotent. TCB retries until the Portal acknowledges each finalized trade.

Last run—

Last successful ACK—

Pending trades0

Portal status—

Account & security

Manage your sign-in security. Administrator accounts can also change the installation username and password.

Loading…

Login usernameChange the name used to sign in.

Change passwordUse a unique password for this dashboard.

Biometric / Passkey

Use fingerprint, Face ID, Touch ID, Windows Hello or the device secure unlock. Biometric data never leaves your device.

Loading…

Loading registered devices…

At sign-in, a registered Passkey is preferred. If unavailable, TCB asks for 2FA when enabled; otherwise the verified password can complete sign-in.

Two-factor authentication (2FA)Optional TOTP protection compatible with Google Authenticator, Apple Passwords and other authenticator apps.

Authenticator label—

Loading…

Subaccounts

Create temporary or permanent dashboard access without sharing the primary administrator credentials.

Checking email…

Credentials are delivered by Email/SMTP. The Email channel in Trade notifications must be saved and successfully tested before a subaccount can be created. Trade-event Email may remain disabled.

Subaccount settings

Choose what the new account can do, how long it remains valid, and where its credentials will be delivered.

Profile

Expiration

WRITE / READ and READ-ONLY may use NEVER. SUPPORT is limited to 24 hours.

Recipient email

The new username and password will be sent to this address.

New subaccount credentials

These are the credentials the new user will use to sign in. They are separate from your administrator account.

New account username

Username the new user will use to sign in.

New account password

Password for the new user.

Administrator authorization

Confirm this action using the administrator account that is currently signed in.

Signed in asLoading…

Current administrator password Required

This is your administrator password. It is not the new user's password.

Username	Profile	Email	Created	Expires	Last login	Status	Actions
Loading subaccounts…

Exchange credentials

Encrypted at rest. Routing or credential changes take effect after bot restart.

Trading connectionLeave API/Secret blank to keep the current encrypted values.

Operational settings

Market

Non-signal bot configuration is managed here. Trading strategies are managed below in Strategy Builder.

Loading…

General bot settings

Cooldown after SELL (sec)

Cooldown after BUY (sec)

Margin & borrowing

Margin type

Balance policy

Side effect type

Borrow / repay policy

Borrow enabled

Borrow asset

Borrow full quote Repay on close Require min sell after interest

Interest estimate mult

Projected ML guard

Min projected margin level

Projected ML safety mult

Allow partial safe borrow

Automatic profit transfer

Enabled

Asset

Destination

Threshold

Ratio (0–1)

Reserve quote

Require repay OK Only when no open lots Only positive profit Final sweep when no open lots

Final sweep reserve

Final sweep threshold

Final sweep delay (sec)

Earn product (auto-detected)

TCB resolves a subscribable Flexible Earn product automatically before moving funds.

Earn source account

Earn auto subscribe

Initial buy / position sizing BTCUSDC

BTCUSDC market-specific sizing
FIXED is the editable sizing matrix. AUTOMATIC is calculated independently for this market and falls back to the saved FIXED cell when needed.

AUTOMATIC · waiting

Enabled

Sizing mode

Fixed default / fallback (USDC)

Automatic technical floor (USDC)

Maximum initial buy cap (USDC) Unlimited

Automatic freshness limit (sec)

Automatic configured hard limit (USDC)

FIXED matrix · editable
Direct BUY amounts in FIXED mode and saved fallback amounts for AUTOMATIC.

Set all FIXED matrix cells to

Regime pair	L0	L1	L2	L3	L4	L5	L6	L7	L8	L9

Save changes before they become active. AUTOMATIC fallback always uses the saved FIXED cell, not an unsaved draft. Global Capital Guard still applies afterward.

AUTOMATIC matrix · read only
This is the effective market-local matrix the bot evaluates before the Global Capital Guard.

No usable AUTOMATIC matrix is available right now. Effective cells are shown from the saved FIXED matrix.

Regime pair	L0	L1	L2	L3	L4	L5	L6	L7	L8	L9

AUTO = calculated amountFIXED fallback = corresponding saved FIXED cell

A low value such as 5 USDC is intentional when that exact regime pair and level has a valid AUTOMATIC recommendation. Stale, missing, no-history or safety-rejected cells display the effective FIXED fallback instead.

Trading & Orders

Pair & execution sizing

Market pair, lot capacity and usable balances.

Trading symbol

Base asset

Quote asset

Max open lots

DCA is enabled for this market, so TCB enforces one open lot. Other markets may each have their own single DCA lot.

Use quote pct (0–1)

Use base pct (0–1)

Minimum quote

Minimum base

Order behavior

Choose LIMIT execution at best ASK/BID or MARKET execution. MARKET uses shared order-book DEPTH to estimate executable average price before the order; confirmed fills remain authoritative.

BUY execution price

ASK places a LIMIT order at the current best ask. MARKET estimates executable average price from shared DEPTH and books the confirmed fill average.

SELL execution price

BID places a LIMIT order at the current best bid. MARKET estimates executable average price from shared DEPTH; execution-sensitive profit indicators use that estimate.

Maximum BUY slippage (%)

MARKET only. Blocks the BUY while estimated DEPTH slippage is above this limit; the trail remains active.

Maximum BUY price drift (%)

MARKET trail only. Prevents chasing price after the trail trigger while waiting for acceptable slippage.

Maximum SELL slippage (%)

MARKET only. Normal SELL / trail execution waits while estimated slippage is above this limit.

Maximum SELL price drift (%)

MARKET trail only. Limits adverse movement from the SELL trail trigger while execution is waiting.

Defensive SELL max slippage (%)

MARKET defensive exits only (Stop Defense / Stop Loss / Force Sell). Uses a wider slippage ceiling and does not use normal trail drift.

Live MARKET slippage

BUY — · SELL —

Live DEPTH estimate for this market and the current configured execution size. Informational when that side uses LIMIT.

Order TTL (sec)

Applies to LIMIT orders only. MARKET orders are reconciled from their exchange fills.

Initial cooldown (sec)

Bot loop seconds

TCV every N

Maker fee fallback (bps) ?

Fallback / pre-trade estimate. 10 bps = 0.10%.

Taker fee fallback (bps) ?

Fallback / pre-trade estimate. 10 bps = 0.10%.

External BTC mode

Dust & repricing

Residual BTC pooling and stale-order repricing.

Dust enabled

Dust policy

Only pool is implemented.

Merge dust on initial

Dust max sources

Repricing enabled

Reprice min age (sec)

BUY threshold (bps)

SELL threshold (bps)

Reprice only if no fill

Trading symbol here controls the bot after restart. Dashboard display symbol remains a separate dashboard preference above.

Execution

Trailing BUY

Controls the BUY trailing once its signal is armed.

OFF

Enabled

Retrace (bps)

Maximum wait (sec)

Reset if signal false

Trailing SELL

Controls the SELL trailing after a valid sell condition is armed.

OFF

Enabled

Retrace (bps)

Maximum wait (sec)

Reset if signal false

Risk Management

DCA structural controls

DCA general

DCA is single-lot per market. Enabling it automatically disables multi-lot for this market; DCA signal logic is managed separately in Strategy Builder.

OFF

DCA enabled

Maximum buy times

Default trigger profit (%)

Default buy percentage

Default buy cost quote Automatic / null

DCA levels

Per-level structural sizing; BUY/SELL formulas are managed in Strategy Builder.

Level	Trigger profit %	Buy percentage	Buy cost quote

DCA buy/sell strategies are configured separately in Strategy Builder below.

V21 Behavior & Analytics

V21 Sticky signals

Persistence and re-arm behavior shared by V21 signal instances. Logging controls are managed in System → Trading logs.

OFF

Enabled

Sticky TTL (sec)

V21 re-arm policies

Controls whether an existing sticky state can be armed again by the same/weaker setup and the minimum score improvement required.

V21 Better Entry

Post-buy analytics that track whether a better price or V21 setup appeared after entry.

OFF

Enabled Track until close Stop on next BUY

Maximum tracking (sec)

Tracking windows (seconds)

Comma-separated windows. 1–16 values.

System / Advanced

Market data cache

Local market-data cache behavior.

OFF

Enabled

Klines channel

Candle-open channel

Ticker channel

Keep

Max stale (ms)

Decision log

Historical decision snapshots and change logging.

OFF

Fee fetch

Exchange fee refresh behavior. Application logging is managed in System → Trading logs.

OFF

Fee fetch enabled

Retries

Sleep (sec)

Minimum trades

Core system status — read only

Core storage and active configuration are managed automatically by TCB. Technical connection details remain hidden from the normal dashboard.

READ ONLY

Internal storage

Managed automatically

Trading data

Ready

Configuration storage

Ready

Security storage

Protected

All editable execution, risk, V21 and strategy settings are managed by the web panels. Core system storage is managed automatically by TCB.

Your authenticated dashboard session authorizes operational changes. Saving creates a new settings revision; restart the bot to apply it. Structural route changes still require the flat-state safety gate.

Strategy Builder

Market

Build INITIAL BUY, SELL / EXIT and DCA strategies without editing JSON. Add indicators, configure their parameters and compose the boolean formula used by the bot.

Loading…

Loading strategy…

Edits remain a draft in the browser until Apply strategy succeeds. Your authenticated dashboard session authorizes apply/restore; restart the bot to activate the saved revision.

Strategy history & rollback

No history loaded.

Core system configuration

TCB manages its core storage and startup configuration automatically. Technical implementation details are intentionally hidden from the normal dashboard.

Loading current config…

User Manual

Version-aligned documentation for setup, configuration, strategies, indicators, updates and troubleshooting.

TCB · Documentation

Search documentation

Loading manual…

System

Pending: —
Mark ts: —

Exchange & API Telemetry

Operational health, exchange traffic, rate-limit pressure, adaptive pacing and candle-cache efficiency.

Loading…

API health—Waiting for telemetry…

API request rate—1m — · 5m avg —

Rate-limit usage—Reported by venue when available

Adaptive pacing—Waiting…

Cache reuse—Memory hits vs exchange Kline HTTP

API traffic by category

Requests; 5m/15m also show average per minute.

Category	Currentpartial min	1 mincompleted	5 mincompleted	15 mincompleted	Since start
Loading…

Top API consumers15 min estimated rate cost

Loading…

Candle CacheSince worker start

Memory Cache hits—

Exchange Kline HTTP—

Global Candle Cache—

Account monitoring uses a shared snapshot; a fresh private-account check is required immediately before a live money-moving order.

Advanced diagnostics

Cache sync skips—

Global row loads—

Aggregated live heads—

Metadata checks—

Single-flight waits—

Transport attempts—

Pages downloaded—

Kline rate cost—

Software update

Select a complete TCB installer ZIP and install it in one step. The server uploads, validates and installs only if every validation succeeds.

Checking…

Install package

TCB full-installer ZIP

Authorization requiredPASSWORD

Clicking Install update uploads the ZIP, validates its manifest, hashes and safety rules, and only then starts the full installer automatically. If validation fails, nothing is installed.

Automatic housekeeping: after a successful installation the server keeps the active version plus two previous versioned files, and the five most recent web-update histories. Backups and files placed directly in /root/version are preserved.

Installation progress

○Package uploaded & verified

○Backup created

○Files & configuration updated

○Services restarted

○Final verification

Loading current version…

Installation details

Condensed diagnostics are shown here. The complete installer log remains stored on the server for troubleshooting.

No installation details yet.

Trading logs

Filter worker events by market, BUY / SELL / SYSTEM and severity. View them here or download the filtered result as a compressed ZIP without using SSH.

Loading…

Generated Logs 0

ZIP files are generated in the background and stored locally on this VPS until you delete them.

File	Created	Status	Size	ETA	Generation time	Actions
Loading generated files…

Logging configuration

Select a market

Controls how the market selected above writes worker logs. Select ALL only for viewing or generating log ZIPs.

Debug

Enable debug mode for detailed worker logging.

App log level

Set the minimum level stored for application logs.

V21 debug logging

Enable additional diagnostic logging for V21.

Enabled

V21 log NONE states

Store V21 NONE states when deeper debugging is needed.

Enabled

V21 interval (sec)

Interval in seconds for V21 logging. Use 0 to disable interval logging.

Log viewer (latest events)

Loading…

Browser preview keeps a fixed maximum of the newest 2,000 matching events. Clear screen changes only this browser view; it never deletes VPS logs. Generate ZIP creates the complete selected time window without a row-count limit.

Debug OFF keeps journald quiet except for one worker heartbeat every 60 seconds. INFO / WARNING / ERROR / CRITICAL events are still stored for diagnosis. DEBUG events are stored only while Debug is ON for that worker.

Log storage protection

Current usage—

Disk free—

Oldest event—

Policy statusAutomatic cleanup

Retention (hours)

Maximum storage (MB)

Minimum free disk reserve (GB)

Heartbeat (sec)

Cleanup removes the oldest files when any guard is reached: retention age, maximum log storage, or minimum free-disk reserve. Defaults: 7 days, 2 GB maximum logs, 10 GB disk reserve.

Support diagnostics

Temporary bounded logging for troubleshooting. Disabled by default; enable it only while reproducing a problem, then download the support package.

Loading…

Storage cap—

Captured—

Service—

Support diagnostics actions use the authenticated dashboard session. The support package never includes API keys, API secrets, passphrases, dashboard password hashes or internal storage credentials.

When enabled, TCB copies only the bot/API journal to a rotating support log. Default limit: 2 MB per file + 2 backups (about 6 MB maximum). Turning it off stops new support-log writes.

Access & security logs

Successful logins, failed attempts, IP blocks, portal unlocks/password resets and security-setting changes.

Loading active blocks…

Date / time	Event	User	IP	Result	Reason
Loading…

Decision	Allow same state	Allow weaker score	Minimum score delta
SUPPORT_CONTEXT_ACTIVE
REJECTION_CONTEXT_ACTIVE
BREAKOUT_CONTEXT_ACTIVE
RETEST_REQUIRED
SWEEP_REVERSAL_CONTEXT

Dashboard

Closed trades (latest)

Possible Buys

Trail Analysis

Post-Sell Analysis

Open trades (open lots)

Closed trades

Late trades

Lot Analytics

By MACRO/MICRO regime

Backtesting

Saved Backtests

Backtest result

V21 Better Entry

Buys (fills)

Sales (fills)

External Sales (fills)

Transfers

Cancelled Orders

Borrow / Repay ledger

Market Performance Ranking

Performance by period

Daily stats

Monthly stats

Markets

Global capital guard

Add trading market

Trading markets

Configuration

Guided setup

Trading mode

Execution

Trading data

Reset trading data

Dashboard config

Trade notifications

Performance analytics

Account & security

Biometric / Passkey

Subaccounts

Exchange credentials

Operational settings

Strategy Builder

Core system configuration

User Manual

System

Exchange & API Telemetry

Software update

Install package

Installation progress

Trading logs

Support diagnostics

Access & security logs